locapack
Brief
Another localisation packet protocol to send/receive localisation data over networks.
Implementation
Arduino
License
Locapack is distributed under the GPLv3 license. Please refer to the LICENSE file.
Packet structure details
Packet general structure
| 2B | 2B | 0/5B | 1B (opt) | variable | 1B | variable |
|---|---|---|---|---|---|---|
header |
sequence_number |
timestamp |
movement_id |
device_id |
payload_len |
localisation_packet_payload |
The sequence_number field is mandatory.
The timestamp field is optional and its presence is announced in the header. The timestamp field contains the number of milliseconds since the boot of the local system. There is no synchronisation between different nodes.
The movement_id field is optional and its presence is announced in the header.
The device_id field length is annouced in the header. A length of 0 means that the field is not present in the packet, for example if the device_id is the same as the source address of the packet.
The payload_len field contains the length of the payload.
The localisation_packet_payload length depends on the localisation_packet_type annouced in the header.
Header structure
| 4b | 4b | 4b | 1b | 1b | 2b |
|---|---|---|---|---|---|
protocol_version |
device_id_size |
localisation_packet_type |
movement_id_presence_flag |
timestamp_presence_flag |
reserved |
The protocol_version field indicates the version of the localisation packet used. This documentation describes the version #1 of the localisation packet protocol.
The device_id_size indicates the number of Bytes of the device_id field. A length of 0 means that no device_id is present in the packet.
The localisation_packet_type indicates the structure of the payload. These types of packet have been described:
-
type 0: Universal GNSS localisation -
type 1: Locally referenced localisation -
type 2: Inter-node proximity
The movement_id_presence_flag must be set to 1 if the movement_id field is present in the packet.
The timestamp_presence_flag must be set to 1 if the timestamp field is present in the packet.
Payload structure by packet type
Type 0 : Universal GNSS localisation
Transport of GNSS coordinates. Altitude and DOP are optionnal.
Payload general structure
| 1B | 4B | 4B | 0/4B | 0/4B |
|---|---|---|---|---|
header |
latitude |
longitude |
altitude |
dop |
The latitude field is a C-type float and is mandatory.
The longitude field is a C-type float and is mandatory
The altitude field is a C-type float and its presence is annouced in the header
The dop field is a C-type float and its presence is annouced in the header
Header
| 1b | 1b | 6b |
|---|---|---|
altitude_presence_flag |
dop_presence_flag |
reserved |
The altitude_presence_flag must be set to 1 if the altitude field is present in the packet.
The dop_presence_flag must be set to 1 if the dop field is present in the packet.
Type 1 : Locally referenced localisation
Transport of locally referenced 2D or 3D localisation. The "repère" is identified by an UID.
Payload general structure
| 1B | 4B | 4B | 0/4B | 0/4B | 0/8B |
|---|---|---|---|---|---|
header |
x |
y |
z |
dop |
repere_id |
The x field is a C-type float and is mandatory.
The y field is a C-type float and is mandatory
The z field is a C-type float and its presence is annouced in the header
The dop field is a C-type float and its presence is annouced in the header
The repere_id field is a 64-bit UID and its presence is annouced in the header
Header
| 1b | 1b | 1b | 5b |
|---|---|---|---|
z_presence_flag |
dop_presence_flag |
repere_id_presence_flag |
reserved |
The z_presence_flag must be set to 1 if the z field is present in the packet (3D localisation).
The dop_presence_flag must be set to 1 if the dop field is present in the packet.
The repere_id_presence_flag must be set to 1 if the repere_id field is present in the packet.
Type 2 : Inter-node proximity
Transport of raw distances (rangings) between pairs of nodes. The ranging technology can be specified.